Minimum Order Quantity | 1 Piece |
Size | 1/2" |
Material | ss, brass, e.t.c |
Packaging Type | wooden box, cardboard box |
An air vent valve is a safety device that discharges air at the water supply piping in order to avoid air related problems in the water piping systems. Major Products TA-3 Series TA-2 5 TAV-3A
Applications Cold and hot water supply system Hot water boiler Solar hot water system Other various devices Air conditioning system Hot water heater appliance Pressure tank
Purposes For protecting piping materials and systems from corrosion due to air (oxygen). For preventing water splashing at faucet due to the existence of air. For preventing noise resulted from the ingress of air into cold/hot water supply systems, air conditioning systems, and other systems. For the smooth startup and stable operation of water supply and other systems/devices through air discharge at the time of initial water conveyance.
Valve Size | 1.5 inch |
Media | Air |
Usage/Application | Industrial |
Pressure | 10 Bar |
Material | Brass |
Automation Grade | Automatic |
Voltage | 230 V |
Country of Origin | Made in India |
Minimum Order Quantity | 1 Piece |
Material | Stainless Steel |
Usage/Application | Water |
Pressure | High Pressure |
Valve Size | 1" |
End Connection Type | Flanged |
Media | Water |
Temperature Of Media | High Temperature |
Automation Grade | Semi-automatic |
I Deal In | New Only |
Gate valves are also called shut-off valves or sluice valves and are manually controlled valves for on/off flow control by rotating a hand wheel to lift or lower a wedge (also called disc) in the (non-obstruction) flow path. Due to their simple design, they are reliable and require little maintenance. The brass housing allows it to be used for water or other neutral liquid media. Due to gate valves requiring multiple turns of the hand wheel it closes/opens slow enough to prevent against a water hammer
Material | Stainless Steel |
Media | Air |
Angle Type | L Type |
Surface Finishing | Silver Plated |
Product Type | Angle Valve |
Usage/Application | Industrial |
Country of Origin | Made in India |
Minimum Order Quantity | 1 Piece |
Size | 1" |
Material | Stainless Steel |
Usage/Application | Water |
Pressure | High Pressure |
Media | Air |
End Connection | Butt Weld |
Check valves (also called non-return valve, one-way valve) are used to allow the flow of fluid in only one direction. They prevent the flow of fluid in the other direction. Check valves work automatically and do not need to be operated. Most available types have a small spring to close the valve, the medium pressure in the forward direction opens the valve. Note that there is a minimum pressure required to open the valve (usually called cracking pressure).
Valve Size | 10 inch |
Usage/Application | Industrial |
Power | Manual |
Pressure | Low Pressure |
Material | Cast Iron |
Operator | Electric Actuator |
Country of Origin | Made in India |
Media | Water |
Pressure | High Pressure |
Connector Type | Screwed |
Material | SS |
Temperature Of Media | High Temperature |
WOG Rating | 150 |
I Deal In | New Only |
Country of Origin | Made in India |